Replacing patio doors

Furniture • Views: 0

Replacing patio doors is a great way to give your home a new look without spending a lot of money. A glass door can bring more light into the kitchen area and add a clear view of the backyard. All you need is a screwdriver and a few minutes to quicklyReplacing patio doors a fresh, new one.
Replacing patio doorsIt is easy to install a replacement patio door because all of the hinges are already in place. This eliminates aligning them correctly. It takes less than an hour to complete this job and the project uses simple hand tools. You will have a new door that lets in summer breezes and enhances the look of your home. Replacing patio doors depend on your need.

Loosen the screws at the top and bottom of the sliding patio door. The rollers will drop down, allowing you to pull the door out of the frame. Lift the sliding door straight up and pull the bottom edge out of the bottom track.

Measure the size of your old door to make sure you purchase a replacement sliding patio door that will fit in the existing frame.

Set the top edge of the new patio door into the top track. Lift up on the door and push the bottom edge until it snaps into the bottom track. Loosen the screws at the top of the Replacing patio doors if you need more give in the rollers. Attach the door hardware and mark where the latch hits the door jamb. Use this marking to determine the correct position of the striker plate. Attach the striker plate to the door jamb, and test the sliding patio door to make sure it latches securely. If it does not, move the striker plate up or down until you have it properly positioned.